Crescent


20:04 09th September 2010

Linear F113/4

Features
	4x focuses the light of two 40 or 55W lamps for high impact wall lighting for retail or large commercial interiors
	Die-cast end plates join at articulated black reveals; machined aluminium knobs - no exposed fasteners
	Integral electronic ballast - dimming, emergency optional
	Accessory snap-in specular parabolic cross baffle

Tate Modern
Photograph:Peter Cook/VIEW Pictures

Product Ref
F113*x 2 40E
2 x 40W Dulux L
F113* x 2 55E
2 x 55W Dulux L
F114* x 2 40E
2 x 40W Dulux L
F114* x 2 55E
2 x 55W Dulux L

* Add ‘ABL000’ to Product Ref for optional cross baffle

Electrical:
Use 90°C wire for supply connections.

Integral electronic HPF thermally protected class P ballast.

X mount units (for use with pendant or cantilever) furnished with remote HPF thermally protected electronic ballast.

Aluminium ballast enclosure includes four 7/8” diameter entries and a knockout for an accessory fuse. Maximum wire length between electronic ballast and fixture is 8’ (2.4m) less length of pendant stem or cantilever arm.

Optional electronic dimming ballast dims to 10% of full light output. (E mount only). Not available for X mount (pendant or cantilever), or for 55W units.

Finish:
Fluted (Cat No 113) - bright clear anodised aluminium housing; silver painted end plates with semi-gloss white yoke and canopy.

Smooth (Cat No 114) - semi-gloss white housing, end plates, yoke and canopy.

Painted surfaces - 6 stage pretreatment and electrostatically applied baked powder enamel for stable, long lasting and corrosion resistant finish.

Reflector and internal end plates - extruded high purity aluminium with clear anodised specular finish. All luminaire hardware - stainless steel. All mounting hardware - zinc or cadmium plated.

F113 Fluted

F114 smooth with baffle