Crescent


22:43 06th July 2008

Cantilever 101/2

Features
	Unequalled low energy wall lighting with T5 or T8 lamps
	Machined aluminium mounting hub attaches to pendant stem or cantilever arm without exposed threads
	Die-cast end plate joins at articulated black reveal - no exposed fasteners
	Optional snap-in specular parabolic cross baffle

Conference Room

Product Ref
F101-A132 F102-A132
1x32W 1x4’ T8 Lamp.
F101-A232 F102-A232
2x32W 2x4’ T8 Lamp.
F101-A140 F102-A140
1x55W 1x5’ T8 Lamps.
F101-A240 F102-A240
2x55W 2x5’ T8 Lamps.

Available with T5 HO lamps.
Please confirm whether cantilever or pendant.

Electrical:
Use 90°C wire for supply connections.

Remote electronic HPF thermally protected class P ballast. Aluminium enclosure includes three 22mm diameter cable entries and one cable grip.

Maximum wire length between electronic ballast and fixture is 2.5m for two-lamp reflectors and 2.5m for one-lamp reflectors, less length of stem or arm.

Optional electronic dimming ballast (T8 only) dims to 10% of full light output. Use of dimming ballast limited to single lamp reflectors only (Configuration 1). Maximum wire length between dimming ballast and fixture is 1.2m, less length of stem or arm.
Compatible dimmer switch is required (by others).

Finish:
Fluted (Cat No 101) - bright clear anodised aluminium housing with chrome end plates.

Smooth (Cat No 102) - semi-gloss white housing and end plates.

Painted surfaces - 6 stage pretreatment and electrostatically applied baked powder enamel for stable, long lasting and corrosion resistant finish.

Reflector - extruded high purity aluminium with clear anodised specular finish. All luminaire hardware - stainless steel. All mounting hardware - zinc or cadmium plated.

Mounting:
Pendant or cantilever mounting hangers (ordered separately); specify end and intermediate hangers.

Pendant assembly furnished with canopy for mounting on recessed outlet box.

102 smooth

Lamp Length	Luminaire Length
1 x 4'	1302mm
1 x 5'	1602mm
2 x 4'	2534mm
2 x 5'	3143mm