Product Ref
F206 P126 TO2 - 26W
Compact Fluorescent
M203 070G TO2 - 70W
CDM Metal Halide G12

Electrical:
Use 90°C wire for supply connections.

203 - 5’ (1.5m) wire leads exit back box for connection to accessible junction box (by others), or to remote ballast (installation prior to finished ceiling recommended). Available for tungsten halogen and metal halide (magnetic) only.

206 - integral ballast and splice compartment with two 20mm clearance entries. Available for 26W quad tube fluorescent.

Fluorescent - integral HPF thermally protected electronic ballast for use with 4-pin lamp. Optional electronic dimming ballast dims to 5% of full light output. Compatible dimmer switch required (by others).

Metal Halide - integral or remote wire-wound ballast in separate compartment. Maximum 1.5m lead length.

Finish:
Semi-gloss white reflector, door, end plates, yoke arms and ceiling trim, with black back box.

Painted surfaces - 6 stage pretreatment and electrostatically applied baked powder enamel for stable, long lasting and corrosion resistant finish.

Reflector - extruded high purity aluminium with clear anodised specular finish. All luminaire hardware - stainless steel. All mounting hardware - zinc or cadmium plated.

Mounting:
Mounting/trim frame installs from below finished ceiling. Clips provided for rigid non-accessible ceilings (drywall, plaster) up to 1-3/4” (44mm) thick. Supplemental supports (hanger wires or C-channels not included ) required for accessible ceilings. For applications where wire suspension is prohibited, order accessory mounting kit to accept suspension bars by others. Frame retrofits into existing non-accessible ceilings.