Finish:
Matt white housing and decorative end plates. Joiner/reveal plates and baffle finished matt grey

Painted surfaces - 6 stage pretreatment and electrostatically applied thermoset powder coat for stable, long lasting and corrosion resistant finish.

Reflector - extruded high purity aluminum with clear anodised specular finish. All luminaire hardware - stainless steel.

Performance:
Two parabolic reflector sections drive light to the bottom of the vertical surface. An elliptical section redirects light that is normally wasted back to a parabola. Glare is minimised and asymmetry of the beam is maximised resulting in high beam efficiency and superior surface uniformity.

Product Ref
F144 T155 - 1 x 55W 4’ T5 HO Lamp.
F144 T180 - 1 x 80W 5’ T5 HO Lamp.
F145 T155 - 2 x 55W 4’ T5 HO Lamps.
F145 T180 - 2 x 80W 5’ T5 HO Lamps.

Electrical:
Units are prewired with 14 AWG modular through wiring with quick connectors. On starter/individual module, one reflector is removed for access to supply connection.

S mount - 20mm clearance knockouts located at each end of back plate for conduit feed (by others). Use 90oC wire for supply connections.

X mount - electrical feed hanger mounts over recessed outlet box (by others). Stem electrical feed supplied with 14 AWG leads. Cable feed includes 16/3 cord.

Integral electronic HPF thermally protected class P ballast with end-of-life protection. Reflectors can be removed to service ballasts.

Optional electronic dimming ballast dims to 1% of full light output. Compatible dimming control is required (by others). Consult sales representative for specifications.