

CRE2817 - PC Programmable Controller
The CRE2817 is a PC programmable DMX Interface. The standalone facility allows the user to create DMX patterns and scenes on a PC and download these to the unit to run automatically or to be triggered by a dedicated control plate and interface (CRE2818)
| No. of channels: | 512 (170 x RGB drivers (CRE2801) with different addresses) |
| No. of drivers connected | 32 |
| No. of programmes: | 256 |
| No. of separate scenes: | 256 |
| Adjustment of static and fade times: | Yes every static and fade independently set, up to 42 minutes - that can be cascaded to give unlimited static time. |
| Sound output: | No |
| Memory card: | No |
| External volt free switches: | Yes, a) 10 through wall switch adaptor (special version required) b) 256 through connector on board (needs 8 separate volt free switches, operated in a binary code) |
| PC programming | Yes. Can be used manually when connected via USB port. Can save programmes to on board memory through USB. Also means can be programmed remotely and programmes emailed to a user for loading mode via PC. |
| Start running programme immediately at switch on: | Yes but only the first one in the store. |
| Output Connection: | 3-pin XLR |