CRE2890 - Wireless Colour Control System
This simple system enables you to control and programme RGB LED lighting effects without the need for complex wiring -in fact with no wiring at all between the wall plate and the DMX controller.
The controller links to the LED driver (via the fitted RJ 45 plug) and is addressed using RF wireless technology by the wall plate or the hand held remote. There are four preset scenes, full red, full green, full blue and full red green & blue. It is a simple matter to change these to any variation of RGB mix, and save as a preset scene.
The system can be made to fade from one scene to another, and the speed of change can be altered through three different settings.
| No. of channels: | 3 (All CRE2801 drivers set to address number one) |
| No. of drivers connected | Max 32 per DMX unit. Another DMX unit can be added and made to respond to the original wall plate (or remote control) |
| No. of programmes: | 1 |
| No. of separate scenes: | 4 - Factory set to: 1 = Red, 2 = Green, 3 = Blue, 4 = All on. All scenes can be reprogrammed to your choice of colour. |
| Adjustment of static and fade times: | Fade time can be set using wall plate or remote controller CRE2893 (order remote controller separately) |
| Sound output: | No |
| Memory card: | No |
| External volt free switches: | No |
| PC programming | No |
| Start running programme immediately at switch on: | No - need one button pressing on Wall Plate (or remote control). |
| Output Connection: | RJ45 |
