CRE2898 - Automated DMX controller
The CRE2898 is an automated DMX lighting control solution designed as an easy to use replay unit. The lighting controller is supplied pre programmed with manual override buttons. It is equipped with a built in DMX control splitter to allow six radial cable circuits. Each circuit can be connected to a maximum of 32 DMX LED luminaires. The pre programmed sequences in this unit have been carefully selected to be effective on any number of DMX controlled LED luminaires up to 170 addresses.
| Power Supply: | The CRE2898 will require a 240 volt electrical supply. |
| DMX Outputs: | |
| Ethernet: | |
| Networking: | |
| I/O: | |
| User Interface: | |
| Time Functions: | |
| LCD display: | |
| Audio In: | |
| Dimensions: | 450mm x 300mm x 140mm |
| Standards: |
